SILHOUETTE SOFT 8 CONES - 10 THREADS
SILHOUETTE SOFT 8 CONES - 10 THREADS. 5 packs of 2 threads, 8 cones each. SILHOUETTE SOFT comes in the form of absorbable threads with bidirectional cones. A redesigned face, regained volume and reduced wrinkles thanks to a 30-minute treatment at the doctor's office, for a result that lasts up to 18 months!
Description
SOFT SILHOUETTE 8 cones - 10 THREADS - SINCLAIR
STRICT MEDICAL USE.
DESCRIPTION
SILHOUETTE SOFT is a very effective tensor thread lift that can be used to reposition the skin tissues of the brow bone, middle and lower face, and neck. It corrects sagging skin and helps reduce the visible signs of aging. SILHOUETTE SOFT is an innovative, absorbable suspension suture with unique cone technology. SILHOUETTE SOFT is used for the treatment of sagging skin on the mid-face, lower face, neck and eyebrows.
8 CONES SMS 22 / 5 packs (2 threads, 8 cones each) 10 THREADS or 5 bags of 2 threads:
- Total length – 30 cm
- Active length – 8.2 cm
- Spacing between nodes 0.5 cm.
SOFT SILHOUETTE INDICATION
- Reduces visible signs of aging
- Instantly improves sagging skin
- Results last up to 24 months.
- A single session with minimal downtime.
Lift using tensor threads.
- Correct sagging skin, eyebrows, jowl, jaw line and neck.
- Redefine an aging facial contour.
- Obtain immediate results that persist.
- Stimulation of collagen production.
SINCLAIR PHARMA SILHOUETTE SOFT PRESENTATION
“Ready to use” kit. All SILHOUETTE SOFT devices are supplied with two stainless steel needles to assist with implantation, one needle is crimped into each end of the mono-filament tensor thread.
- 10 THREADS: 5 packs x 2 sutures.
- 8 cones / Total wire length 30 cm.
- 2 straight needles of 12 cm.
- 5 traceability labels.
- Packaging instructions.
- Storage between 0℃ and 8℃.
- Sterile packaging.
INGREDIENTS
Polylactic acid surgical threads with molded lactide/glycolyde tips.
EFFICIENCY
SILHOUETTE SOFT tensor threads are sterile, implanted and resorbable medical devices. SILHOUETTE SOFT tensor threads allow
- Reposition
- Fix the subdermis in an elevated position
- Treat morphological asymmetry and tissue sagging.
SOFT SILHOUETTE COMPOSITION
SILHOUETTE SOFT tensor threads are composed of a poly-L-lactic acid (PLLA) monofilament, fitted with a number of hollow molded cones of poly(L-lactic-co-glycolic) acid ( PLGA).
SOFT SILHOUETTE RESULTS
OVAL OF THE FACE
The contour of the face is redrawn. Cheeks appear fuller. The skin regains its tone.
MANDIBULE
The volume of the cheek is redefined. The oval of the face regains a defined shape.
CHEEKS AND CHEEKONES
The cheeks and cheekbones appear fuller. The nasolabial fold is reduced
EYEBROWS
The outer tip of the eyebrows is raised, the eyes are more open.
NECK
The skin of the neck regains its tone and appears smoother.
SIHOUETTE SOFT RANGE
SOFT SILHOUETTE RANGE / With 8 cones, 12 cones or 16 cones on 26.8 cm, 27.5 cm or 30 cm long sutures. For a treatment adapted to everyone. There are several products within the range. The main differences being the number of threaded cones, the spacings between them and the “active length”. 8, 12 and 16 cone devices are available, meaning the treatment can be customized based on the dimensions of the area to be repositioned and the number of cones needed for tissue engagement.
8 CONES SMS 22 / 5 packs (2 threads of 8 cones each)
- Total length – 30 cm
- Active length – 8.2 cm
- Spacing between nodes 0.5 cm
12 CONES SMS 23 / 5 packs (2 threads of 12 cones each)
- Total length – 27.5 cm
- Active length – 14.1 cm
- Spacing between nodes 0.8 cm
12 SHORT CONES SMS 26 / 5 packs (2 threads of 12 cones short each)
- Total length – 27.5 cm
- Active length – 10.4 cm
- Spacing between nodes 0.5 cm
16 CONES SMS 25 / 5 packs (2 threads of 16 cones each)
- Total length – 26.8 cm
- Active length – 18.0 cm
- Spacing between nodes 0.8 cm.
Bidirectional cone TECHNOLOGY
The cones anchor the fabric and are equally distributed on each side of a central portion without a cone. The two cone portions are oriented in opposite directions to create a “repositioning” side and an “anchoring” side. Each cone is kept separate from its neighboring cone by means of a series of knots on the tensor thread. Spacing between nodes provides a small range of movement allows